The Smart Doll torso was designed to hold a variety of gadgets and hide away wires but there are some folks out there who prefer their cute girls (and guys) with wires sticking out of them - introducing the product that covers this demographic - Smart Doll USB Hub!
Smart Doll USB Hub was originally going to be a BTO (Build To Order) product but I didn't expect there to be a flood of orders which our production line cant handle efficiently. For this reason, I have decided to sell the USB Hub torso separately.
The Smart Doll girls have two USB 2.0 sockets - the reason why I didn't make them USB 3.0 is because they required an additional wire to power the device. Also do note that this product is supposed to be attached to a computer.
If you already have a Smart Doll then you can either order the USB Hub Torso or do it yourself - its simple (kinda).
First off you need to find a USB hub that fits inside the torso - USB 2.0 hubs are usually smaller than USB 3.0 hubs. Then you need to cut slots for the USB ports like so. Its best to use a hairdryer to heat the shell before cutting.
The hub I chose was the ELECOM U2H-TZ410BBK. I only used two ports because the torso curves inwards at the top which means that I cant have all 3 ports flush with the surface.
If you are ordering this option, do note that you cant change the hub to another brand or type - also make sure to check the specs of the hub too.